·System features:·Rugged design for shop floor operation·Up to 300 mm x 400 mm (11.3/4" x 15.3/4") field of view, up to 130 mm (5.1/8") part height·Open-standard data output for integration with other information and reporting systems·Open-stand

Itacasrl, founded 1996, has been continuously developing thetechnique of CMM SW and HW.The field of activity has constantlyevolved since the start in CMM SW.Probing, controllers, specialized HWand SW, always on the mainstream ofmetrology, have been d

Focus: Stem Tibia ImplantsChallenge: Orthopedic implants present a unique manufacturing challenge. Many implants are produced on a semi-custom or even a custom basis to suit the individual patient. The stem tibia implant consists of a number of conto

VIEW Micro-Metrology is the combination ofMicro-MetricandVIEW Engineering, two technology-leading companies each with over 30 years of experience designing and building the world's best non-contact optical metrology systems that have joined together

With high load capacity hydrostatic air bearings, SmartScope® ATS™ Measures large parts and leads the way in speed, accuracy and reliability.ATS uses a massive granite substructure to provide the rigidity and low center of mass needed for high

Q&A test

Many surfaces (such as glass, clear plastic, and mirror-like finishes) create images with extremely low, or worse, nonexistent contrast. How can these be measured? With the Grid Projector accessory from OGP.The Grid Projector is available for SmartSc

ShapeGrabber systems are the ideal tool for rapid inspection of complex shaped parts such as plastic injection molded components. Unlike traditional methods that rely on the inspection of a few points, the non-contact ShapeGrabber technology captures

Optical sectioning is a non-destructive method of measuring irregular shapesthat are often difficult to reach by other measuring methods.The procedure consists of focusing on a edge of light perpendicular to the part,then viewing the edge of light at

1. Lubricate periodically the drive system and guide rail of SmartScope metrology machine by professionals or OGP engineers，making the system moving smoothly and keeping a good using state.2. After SmartScope stops tasks, clean the working stage fr